What To Do If Your Water Heater Unexpectedly Stops Working
What To Do If Your Water Heater Unexpectedly Stops Working
Blog Article
The author is making a number of great pointers about How to Troubleshoot and Repair an Electric Water Heater in general in this content which follows.
Lots of modern residences utilize an electrical water heater for their heater, due to its comfort and simplicity of use. Nonetheless, much like any other electric home appliances, troubles may develop with its usage, suddenly. It can be actually aggravating to get up to a cold shower rather than a warm one or having your bath with water that isn't warm adequate or even also hot. Whatever the situation might be, water heater issues can be quite stressful. The good news is, we've made a listing of feasible solutions to your hot water heater concerns. There are a number of aspects that can cause a number of these troubles, it could be a problem with the power supply, the electric burner, or the thermostat. Before doing anything, ensure you switch off the main power supply for safety. Whatever the issue is, getting it dealt with should not position excessive of a concern if you follow these steps:
Call An Expert:
If after changing all damaged parts as well as resetting your temperature level, the hot water heater still isn't functioning, you may need to get in touch with a professional plumber for a specialist point of view. The problem with your heating unit could be that the hot and cold faucets have actually been switched over or it might be undersized for the amount of hot water needed in your home. Whatever the situation might be, a specialist plumber would certainly aid solve the problem.
Check Your Power Supply:
As fundamental as this may appear, it is extremely needed. Without appropriate power, your water heater will not function. So the first thing to do when your water instantly retires is to verify that it isn't a power problem. Check if the fuse is burnt out or the breaker tripped. If the circuit breaker is the concern, merely turn it on and off once again. Replace any busted or worn-out fuse. Evaluate the appliance with power after these adjustments to see if it's now working.
Examine Your Thermostat:
If your hot water heater still isn't working or the water appearing isn't warm sufficient, you might need to check the temperature setups on your top thermostat. Guarantee the circuit breaker is turned off prior to doing anything. Open up the access panel and press the red switch for temperature level reset above the thermostat. This should aid warm the water. Turn the circuit breaker back on and also examine if the issue has been resolved.
Examine the Heating Element in the Water Heater:
If it's not a power trouble, after that try checking out your burner if it is still working. Test each of your burner to make sure the problem isn't with any one of them. If any one of them is faulty, change that part and then examine whether the hot water is back on.
Conclusion
Hot water heater problems are not constantly significant. A lot of them result from minor concerns like a blown fuse or damaged heating element. Changing the defective components must suffice. However, if you are still incapable to resolve the problem, give a call to your nearby plumber to come to get it taken care of.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Hopefully you enjoyed our excerpt about How to Troubleshoot and Repair an Electric Water Heater. Thanks a ton for taking time to browse our piece of content. Do you know another person who is excited about the subject? Why not promote it. Kudos for your time. Visit again soon.
Course Detail
Report this page